Showing posts with label frame. Show all posts
Showing posts with label frame. Show all posts

Monday, March 26, 2012

Large Picture Frame Mat

We went to Vegas a little while ago and got this really neat spray paint-painting done for us. They wanted to sell us a mat for it for $15 I told my husband heck no, they would be cheaper at Micheal's, especially with a coupon. We went and were going to get a custom frame and holy expensive! I don't think I'll ever be doing that, let alone for a $30 piece of art. We got a cheaper frame and I realized I could make my own mat for less than a dollar, especially since we don't have to worry about things being acid free because it's not a picture.

Every time I go to the dollar store I try to take note of what is there in case I need it later on. Last time I was there I noticed they had poster board. I went back and got a piece of the black and it was only fifty cents, awesome!

Take the fake picture that comes with the frame and set it on your poster board and cut out around it. Put double sided tape on the back of your art and lay it in the middle of the poster board. Put it in the frame and hang! So cheap any easy, right? This could be done if you had a printed picture as well, but I would make sure that the poster board and tape was acid free.

Sunday, July 11, 2010

Ribbon Memo Board

Many people have done this project, and if not, you need to try it. It was easy and it's useful.


Mine were both made from what I had around the house, left overs from other projects. The first one I did I used a wooden picture frame that had held a mirror (used on the wanted poster). It was from the dollar tree. I put cardboard inside the frame to back it since I had taken the mirror out.

First you want to find fabric, batting and ribbon. The fabric needs to be a few inches bigger than your frame on each side. The batting should be the same. I didn't have batting, so I used stuffing. It came out a bit more lumpy, I like to think of it as cloud-like. The ribbon is tricky, measure your frame diagonally (I got 17 inches), add 2-3 inches (20). Multiply that by 4 (80).

Lay down your fabric and then your batting. Fold around the edges of your frame and staple them down. I used a staple gun, but a normal stapler can work also. Make sure you pull the fabric tight.


Next you will cut your ribbon. Of your total length, cut it in half. Then cut one of the halves into a quarter of the original length. Now you have a half piece, and two quarter pieces. Take one of the quarters and staple the edge onto the corner of the back of your frame.

Pull the ribbon across the front of the frame (over your fabric and batting) and staple the other side to the back of the frame. Make sure that the ribbon is laying flat. Do the same thing from the other two corners.

Next take the half piece of ribbon and staple it on the back between the two side corners. Pull the ribbon across the front of the frame to the middle of the top of the frame and staple it on the back. Fold the ribbon to go over the front of the frame and pull to the next side and staple it on the back. Fold it over, and pull it to the bottom middle of the frame. Staple and fold again. Pull it over back to the original side of the frame and staple it next to the other end of the ribbon. Confusing? The first picture is of the finished back of the first sample and the pictures below that are of my second sample. The thinner black ribbon is the first two quarters you stapled on, and the thicker brown ribbon is the single half-piece of ribbon.




That was all that I did on the first sample, I liked it just the way it was, I pinned on a cute flower and cute pin for whatever I wanted to hang on it later. The second sample I added a little more. I used pins to hold down the ribbons a bit tighter and for some cuter looks. On the backside after I pushed the pin though the cardboard I bent them and put a piece of duct tape to hold them down better. (If its on the back who cares what it looks like :) I also stapled a loop of ribbon at the top to use when I went to hang it up. There are all sorts of variations you can do for this idea, just be creative and use what you have! You can find the first sample on etsy.com. Thanks for reading!

Thursday, July 1, 2010

WANTED, DEAD OR ALIVE

We saw this idea at a trading post near the Grand Canyon and it was a super cute idea, but mine looks much better. One of these will look great in our cowboy themed spare bedroom. If you want one for your house you can paint one yourself, it was a fun project. You just cut a piece of plywood, and paint it to look like wood, or stain it if your piece of plywood looks good enough, and then print some words that you want to stencil and cut them out of cardstock or cardboard and sponge them onto your background. Then I used tacky glue to hold the mirror to the wood and hot glued the leather cord around the mirror.