Showing posts with label shirt. Show all posts
Showing posts with label shirt. Show all posts

Tuesday, June 5, 2012

My First Quilt- a T-Shirt Quilt

I finally finished my first quilt! I used my husband's t-shirts to make a quilt for my little boy to have while he's gone. It made it easier for my husband to go through and get rid of some of his old t-shirts.

Each of the squares are 15x15. For a baby it's huge, but he will grow into it. I used sheer fusible backing for the t-shirts and there is no batting because it's hot here and I want the baby to be able to use it all the time. With the fusible backing on the t-shirts and the actual backing it is still plenty thick. I used painter's tape to make my sideways lines while quilting it, and each line is A Very Hungry Caterpillar Board Book apart. (You know you love my measuring methods!) I used a nice gray for the quilting after finding out that micro-filament is difficult to use.







Thursday, May 3, 2012

Sleeveless Onsie from Adult T-Shirt

I found this cute idea for a shortall on Pinterest. It's by Heather of Feather's Flights and she made a great tutorial and pattern. Check her's out here. I had some ideas of how I wanted to change it, so here's what I did.

I didn't use her pattern, although I'm sure it would be easier (I haven't had ink in my printer for quite awhile now, it would have been easier but at least it makes me think creatively!). I used one the baby already had and traced it onto tissue paper. I made sure to add quite a bit of space on each side, because I wanted him to have room to grow and for my seam allowance. I also was planning on making a tank top, so there was extra space on the sides of the neck.

The onsie I was copying didn't have the extra piece that Heather had on hers, it was just the front and the back pieces, the same shape. After cutting out the pattern I pinned it to the front of the t-shirt and cut it out of the shirt.

Next I cut the neckline and just cut a little bit off of each side and then pin it back together and sew it.

The sides also need to be sewn, put the two pieces with outsides facing in together, then pin and sew the sides, starting under the arm hole.

The next thing is to hem the legs and arm holes. I did just a single fold under and stitched it.

Next it is time to figure out the snaps. I used snap tape and sewed it on by first pinning one side to the bottom, but with both outsides facing in. I stitched one side and then turned it over so insides were both inside and stitched it closed. For the bottom snaps I pinned them outsides facing in and just stitched it once. Now when they snap the tape isn't very visible.





Friday, September 23, 2011

Repurposed Onsie

My son wore this onsie twice. It wasn't because he grew out of it this time!

Check out what I did with it at Arizona Mama!

Wednesday, September 14, 2011

Incedibles Costume T-shirt

Every year at work we dress up for Halloween. There's a theme for everyone in the clinic. This year our theme is superheroes. I will only be working a couple hours that day so I wanted something easy and comfortable. My sister suggested Elastigirl.

This same T-shirt could be for any of the Incredibles, I might do one on a red onsie so that my baby can be Jack-Jack.



Materials Needed:
Red T-Shirt
Black Scraps
Orange Scraps
Yellow Scraps
White Scrap
Ribbon

T-Shirt Instructions:
I used an old T-shirt of my husband's and tried to put it together to fit me, but it would be much easier to use a shirt that already fits.

First I added the black neckline. I used another old T-shirt for this, but any type of black fabric would work. I cut the neckline out of the shirt and sewed it on, but if I was using a T-shirt that fit, I would have cut out black fabric and folded it over the existing neckline and sewn it on that way.

Next, I cut out the pieces for my logo. I googled the logo and copied it from there. You could print it out and cut it out if you needed a pattern. For the fabric I used scraps I had, but if you have more choices than I did, I would choose knit fabrics so that the edges don't fray (like mine did).

I cut the black out of the other t-shirt. I just cut a big oval. I used the black oval to figure out the outside line of the orange. I guessed the inside cuts of the orange and pinned them to the black. I cut a rectangle for the bottom of the i and then cut off the top with a slant. I used a can that was slightly wider than the bottom of the i to trace the next piece of yellow. I used another circle lying around my kitchen for the white in the i.

To sew the patch I started with the black piece with the orange pinned on. I used black thread (I didn't have any orange) and a small, dense zig-zag stitch. I sewed the edges of the inside of the orange. I then pinned on the i pieces and did the outside of the yellow. I then switched to white thread and sewed the middle of the i on.

Once the patch is finished, it's time to sew it on the shirt. On a smaller shirt you may have to take the shirt apart to sew it on, mine I didn't need to. I switched to red thread and did the same zig-zag stitch around the edges.

Mask Instructions:

If you want a model to work with, you can make a quick mold of your face using tin foil. I used a knit black scrap and just started cutting, comparing to my model. I folded it in half to try to make it a bit more symmetrical. I hot glued the ribbon to the middle of the edge on each side, and had plenty so I could tie a bow in the back.


I loved the way it turned out, but next time I will definitely use knit scraps for everything! I will probably just wear both of these with jeans, but it would be easy to use a pair of red sweatpants with black undies over the top if you were brave!

Thursday, July 8, 2010

Cuter T-Shirt Idea


This was a shirt that someone gave me, I loved the style of the shirt but it said something weird on it, in a font that made it only fit for kids in high school, and not my style.

First, I found some extra fabric I had laying around (actually a pair of white boxers that had been tossed into my scraps after my husband decided he didn't like how they fit) and I cut a square out that covered the words.

The next step to making this fabric look cute is to make a stencil. I like to make my own stencils because then they're personalized and because I don't have to buy them. To make your own stencil, find an image (or if your artsy, draw one!) on a google image search or clip art. Then put it in word or paint and make it the size that you want it to be on your t-shirt and print it out on the card stock. Then you will cut it out. Keep in mind that sometimes if you don't use a stencil image that there can be center pieces that will fall out (Think about cutting out an "A" and how you need the middle triangle to be there), so draw lines of parts you need to keep when you cut.

After you've made your stencil it's time to paint it onto the fabric. Fabric paints work best, but I've found that acrylic paints still work, they wash fine and only fade a little. I sponged my star shape on and then brushed the silver on around it. I also stitched on a button in the center.

When your fabric is finished it's time to take it to the sewing machine. I used a zig-zag stitch to keep the frayed ends from fraying too much and sewed a big square around the writing on the shirt.

Hope you can use this idea to make something even cuter!